Logo
Login Sign Up
Current Revision

ASTM A269/A269M-25

Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
Best Price Guarantee
Instant
2-5 Days
SAVE 10%

$72.00

$72.00

$129.60

$86.00

$86.00

$154.80



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


View in Library
or
ASTM International Logo

ASTM A269/A269M-25

Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

PUBLISH DATE 2025
PAGES 7
ASTM A269/A269M-25

This specification covers nominal-wall-thickness, seamless and welded austenitic steel tubing for general corrosion-resisting and low- or high-temperature service.

All material shall be furnished in the heat-treated condition. The steel shall conform to the chemical composition requirements.

Different mechanical test requirements are presented, which include:

  • flaring test,
  • flange test,
  • hardness test, and
  • reverse flattening test.

Also, each tube shall be subjected to the non-destructive electric test or the hydrostatic test.

Finally, the hardness requirements for different grades of tubes are highlighted.

1.1 This specification covers grades of nominal-wall-thickness, stainless steel tubing for general corrosion-resisting and low- or high-temperature service, as designated in Table 1.

Table 1: Composition of Stainless Steel Tubing Grades

1.2 The tubing sizes and thicknesses usually furnished to this specification are 1/4 in. [6.4 mm] in inside diameter and larger and 0.020 in. [0.51 mm] in nominal wall-thickness and heavier.

1.3 Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in inside diameter or 0.015 in. [0.38 mm] in thickness.

Note 1: Additional testing requirements may apply for use in ASME B31.3 applications.

1.4 Optional supplementary requirements are provided and, when one or more of these are desired, each shall be so stated in the order.

1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

SDO ASTM: ASTM International
Document Number A269
Publication Date Sept. 1, 2025
Language en - English
Page Count 7
Revision Level 25
Supercedes
Committee A01.10
Loading...

Failed to load document history.

Publish Date Document Id Type View