Logo
Login Sign Up
Current Revision

ASTM D3032-21a

Standard Test Methods for Hookup Wire Insulation
Best Price Guarantee
Instant
2-5 Days
SAVE 10%

$99.00

$99.00

$178.20

$119.00

$119.00

$214.20



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


View in Library
or
ASTM International Logo

ASTM D3032-21a

Standard Test Methods for Hookup Wire Insulation

PUBLISH DATE 2021
PAGES 39
ASTM D3032-21a

These test methods detail the standard procedures for testing hookup wire insulations including all components of the insulation system used on single insulated conductors or an assembly of single insulated conductors such as a cable bundle and harness or flat ribbon cable.

The insulating materials include not only the primary insulation over the conductor, but also insulating jackets over shielded constructions.

The test procedures covered here shall be performed in the conditions or shall determine the properties, as follows:

  • axial stability (longitudinal change) after thermal exposure;
  • bondability to potting compounds;
  • capacitance;
  • cold bend test;
  • concentricity;
  • crush resistance;
  • dielectric breakdown voltage;
  • dimensions;
  • dry-arc tracking;
  • dynamic cut-through;
  • fluid immersion;
  • high temperature shock;
  • insulation-continuity proof tests;
  • insulation resistance;
  • partial discharge (corona) inception and extinction voltage;
  • relative thermal life and temperature index;
  • strip force;
  • surface resistance;
  • tensile properties;
  • vertical flame test;
  • voltage rating of hook-up wire;
  • voltage withstand test;
  • wet arc-tracking.

1.1 These test methods cover procedures for testing hookup wire.

1.2 For the purposes of these test methods, hookup wire insulation includes all components of the insulation system used on single insulated conductors or an assembly of single insulated conductors such as a cable bundle and harness or flat ribbon cable. The insulating materials include not only the primary insulation over the conductor, but also insulating jackets over shielded constructions.

1.3 These test methods and their locations are as follows:

  • Axial Stability (Longitudinal Change) After Thermal Exposure — Section 20
  • Bondability of Insulation to Potting Compounds — Section 18
  • Capacitance — Sections 9 to 11
  • Cold Bend Test — Section 25
  • Concentricity — Section 25
  • Crush Resistance — Section 19
  • Dielectric Breakdown Voltage — Section 5
  • Dimensions — Section 14
  • Dry-arc Tracking — Section 28
  • Dynamic Cut-through — Section 21
  • Fluid Immersion — Section 22
  • High Temperature Shock — Section 23
  • Insulation-Continuity Proof Tests — Section 12
  • Insulation Resistance — Section 6
  • Partial Discharge (Corona) Inception and Extinction Voltage — Section 24
  • Relative Thermal Life and Temperature Index — Section 13
  • Strip Force — Section 26
  • Surface Resistance — Section 26
  • Tensile Properties — Section 16
  • Vertical Flame — Section 17
  • Vertical Flame Test A — Section 18.5 (Test Method D8354)
  • Vertical Flame Test B — Sections 17.6 – 17.11.4
  • Voltage Rating of Hook-Up Wire — Section Annex A1
  • Voltage Withstand Test — Section 8
  • Wet Arc-tracking — Section 27

1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.

1.5 This standard measures and describes the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not, by itself, incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions.

1.6 Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests.

1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 17.1.3, 24.4, and Note 18.

1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

SDO ASTM: ASTM International
Document Number D3032
Publication Date April 1, 2021
Language en - English
Page Count 39
Revision Level 21a
Supercedes
Committee D09.07
Loading...

Failed to load document history.

Publish Date Document Id Type View