ASTM D7128-18

Current Revision
Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation

Best Price Guarantee Jul 15, 2018 English 26 Pages


Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
ASTM International Logo

ASTM D7128-18

Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation

PUBLISH DATE 2018
PAGES 26
ASTM D7128-18

1.1 Purpose and Application:

1.1.1 This guide summarizes the technique, equipment, field procedures, data processing, and interpretation methods for the assessment of shallow subsurface conditions using the seismic-reflection method.

1.1.2 Seismic reflection measurements as described in this guide are applicable in mapping shallow subsurface conditions for various uses including geologic (1), geotechnical, hydrogeologic (2), and environmental (3).2 The seismic-reflection method is used to map, detect, and delineate geologic conditions including the bedrock surface, confining layers (aquitards), faults, lithologic stratigraphy, voids, water table, fracture systems, and layer geometry (folds). The primary application of the seismic-reflection method is the mapping of lateral continuity of lithologic units and, in general, detection of change in acoustic properties in the subsurface.

1.1.3 This guide will focus on the seismic-reflection method as it is applied to the near surface. Near-surface seismic reflection applications are based on the same principles as those used for deeper seismic reflection surveying, but accepted practices can differ in several respects. Near-surface seismic-reflection data are generally high-resolution (dominant frequency above 80 Hz) and image depths from around 6 m to as much as several hundred meters. Investigations shallower than 6 m have occasionally been undertaken, but these should be considered experimental.

1.2 Limitations:

1.2.1 This guide provides an overview of the shallow seismic-reflection method, but it does not address the details of seismic theory, field procedures, data processing, or interpretation of the data. Numerous references are included for that purpose and are considered an essential part of this guide. It is recommended that the user of the seismic-reflection method be familiar with the relevant material in this guide, the references cited in the text, and Guides D420, D653, D2845, D4428/D4428M, Practice D5088, Guides D5608, D5730, D5753, D6235, and D6429.

1.2.2 This guide is limited to two-dimensional (2-D) shallow seismic-reflection measurements made on land. The seismic-reflection method can be adapted for a wide variety of special uses: on land, within a borehole, on water, and in three dimensions (3-D). However, a discussion of these specialized adaptations of reflection measurements is not included in this guide.

1.2.3 This guide provides information to help understand the concepts and application of the seismic-reflection method to a wide range of geotechnical, engineering, and groundwater problems.

1.2.4 The approaches suggested in this guide for the seismic-reflection method are commonly used, widely accepted, and proven; however, other approaches or modifications to the seismic-reflection method that are technically sound may be equally suited.

1.2.5 Technical limitations of the seismic-reflection method are discussed in 5.4.

1.2.6 This guide discusses both compressional (P) and shear (S) wave reflection methods. Where applicable, the distinctions between the two methods will be pointed out in this guide.

1.3 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This guide is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration for a project’s many unique aspects. The word “Standard” in the title of this guide means only that the document has been approved through the ASTM consensus process.

1.4 The values stated in SI units are regarded as standard. The values given in parentheses are inch-pound units, which are provided for information only and are not considered standard.

1.5 Precautions:

1.5.1 It is the responsibility of the user of this guide to follow any precautions within the equipment manufacturer’s recommendations, establish appropriate health and safety practices, and consider the safety and regulatory implications when explosives or any high-energy (mechanical or chemical) sources are used.

1.5.2 If the method is applied at sites with hazardous materials, operations, or equipment, it is the responsibility of the user of this guide to establish appropriate safety and health practices and determine the applicability of any regulations prior to use.

1.5.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

1.1 Purpose and Application: 

1.1.1 This guide summarizes the technique, equipment, field procedures, data processing, and interpretation methods for the assessment of shallow subsurface conditions using the seismic-reflection method.

1.1.2 Seismic reflection measurements as described in this guide are applicable in mapping shallow subsurface conditions for various uses including geologic (1), geotechnical, hydrogeologic (2), and environmental (3).2 The seismic-reflection method is used to map, detect, and delineate geologic conditions including the bedrock surface, confining layers (aquitards), faults, lithologic stratigraphy, voids, water table, fracture systems, and layer geometry (folds). The primary application of the seismic-reflection method is the mapping of lateral continuity of lithologic units and, in general, detection of change in acoustic properties in the subsurface.

1.1.3 This guide will focus on the seismic-reflection method as it is applied to the near surface. Near-surface seismic reflection applications are based on the same principles as those used for deeper seismic reflection surveying, but accepted practices can differ in several respects. Near-surface seismic-reflection data are generally high-resolution (dominant frequency above 80 Hz) and image depths from around 6 m to as much as several hundred meters. Investigations shallower than 6 m have occasionally been undertaken, but these should be considered experimental.

1.2 Limitations: 

1.2.1 This guide provides an overview of the shallow seismic-reflection method, but it does not address the details of seismic theory, field procedures, data processing, or interpretation of the data. Numerous references are included for that purpose and are considered an essential part of this guide. It is recommended that the user of the seismic-reflection method be familiar with the relevant material in this guide, the references cited in the text, and Guides D420, D653, D2845, D4428/D4428M, Practice D5088, Guides D5608, D5730, D5753, D6235, and D6429.

1.2.2 This guide is limited to two-dimensional (2-D) shallow seismic-reflection measurements made on land. The seismic-reflection method can be adapted for a wide variety of special uses: on land, within a borehole, on water, and in three dimensions (3-D). However, a discussion of these specialized adaptations of reflection measurements is not included in this guide.

1.2.3 This guide provides information to help understand the concepts and application of the seismic-reflection method to a wide range of geotechnical, engineering, and groundwater problems.

1.2.4 The approaches suggested in this guide for the seismic-reflection method are commonly used, widely accepted, and proven; however, other approaches or modifications to the seismic-reflection method that are technically sound may be equally suited.

1.2.5 Technical limitations of the seismic-reflection method are discussed in 5.4.

1.2.6 This guide discusses both compressional (P) and shear (S) wave reflection methods. Where applicable, the distinctions between the two methods will be pointed out in this guide.

1.3 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This guide is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration for a project’s many unique aspects. The word “Standard” in the title of this guide means only that the document has been approved through the ASTM consensus process.

1.4 The values stated in SI units are regarded as standard. The values given in parentheses are inch-pound units, which are provided for information only and are not considered standard.

1.5 Precautions: 

  • 1.5.1 It is the responsibility of the user of this guide to follow any precautions within the equipment manufacturer’s recommendations, establish appropriate health and safety practices, and consider the safety and regulatory implications when explosives or any high-energy (mechanical or chemical) sources are used.
  • 1.5.2 If the method is applied at sites with hazardous materials, operations, or equipment, it is the responsibility of the user of this guide to establish appropriate safety and health practices and determine the applicability of any regulations prior to use.
  • 1.5.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

5.1  Concepts:

5.1.1 This guide summarizes the basic equipment, field procedures, and interpretation methods used for detecting, delineating, or mapping shallow subsurface features and relative changes in layer geometry or stratigraphy using the seismic-reflection method. Common applications of the method include mapping the top of bedrock, delineating bed or layer geometries, identifying changes in subsurface material properties, detecting voids or fracture zones, mapping faults, defining the top of the water table, mapping confining layers, and estimating of elastic-wave velocity in subsurface materials. Personnel requirements are as discussed in Practice D3740.

5.1.2 Subsurface measurements using the seismic-reflection method require a seismic source, multiple seismic sensors, multi-channel seismograph, and appropriate connections (radio or hardwire) between each (Fig. 1, also showing optional roll-along switch).

Seismic energy propagation time between seismic sensors depends on wave type, travel path, and seismic velocity of the material. The travel path of reflected body waves (compressional (P) and shear (S) waves) is controlled by subsurface material velocity and geometry of interfaces defined by acoustic impedance (product of velocity and density) changes. A difference in acoustic impedance between two layers results in an impedance contrast across the boundary separating the layers and determines the reflectivity (reflection coefficient) of the boundary; for example, how much energy is reflected versus how much is transmitted (Eq 3). At normal incidence:

Equation D7128-18_3

where:

R = reflectivity = reflection coefficient,
V1V2 = velocity of layers 1 and 2,
ρ1ρ2 = density of layers 1 and 2,
Vρ = acoustic impedance, and
A = impedance contrast.

Snell’s law (Eq 4) describes the relationship between incident, refracted, and reflected seismic waves:

Equation D7128-18_4

where:

i = incident angle,
r = reflected angle, and
t = refracted angle.

At each boundary represented by a change in the product of velocity and density (acoustic impedance), the incident seismic wave generates a reflected P, reflected S, transmitted P, and transmitted S wave. This process is described by the Zoeppritz equations (for example, Telford et al. (4)).

5.1.3.2 Analysis and recognition of seismic energy arrival patterns at different seismic sensors allows estimation of depths to reflection coefficients (reflectors) and average velocity between the reflection coefficient and the earth’s surface. Analog display of the seismic waves recorded by each seismic sensor is generally in wiggle trace format on the seismogram (Fig. 2) and represents the particle motion (velocity or acceleration) consistent with the orientation and type of the seismic sensor (geophone or accelerometer) and source.

(A) Velocities are mean for a range appropriate for the material (5).

(B) Acoustic impedance is velocity multiplied by density, specifically for compressional waves; the equivalent for shear waves is referred to as seismic impedance (units of kg/s·m2).

(C) Subsonic velocities have been reported by researchers studying the ultra-shallow near surface.

(A) Layer 1 on Fig. 1.

(B) Layer 2 on Fig. 1.

(C) R in Eq 3, Absolute value R = 1 total reflectance.

5.2.1 The seismic-reflection method images changes in the acoustic (seismic) impedance of subsurface layers and features, which represent changes in subsurface material properties. While the seismic reflection technique depends on the existence of non-zero reflection coefficients, it is the interpreter who, based on knowledge of the local conditions and other data, must interpret the seismic-reflection data and arrive at a geologically feasible solution. Changes in reflected waveform can be indicative of changes in the subsurface such as lithology (rock or soil type), rock consistency (that is, fractured, weathered, competent), saturation (fluid or gas content), porosity, geologic structure (geometric distortion), or density (compaction).

5.2.2 Reflection Coefficient or Reflectivity—Reflectivity is a measure of energy expected to return from a boundary (interface) between materials with different acoustic impedance values. Materials with larger acoustic impedances overlying materials with smaller acoustic impedances will result in a negative reflectivity and an associated phase reversal of the reflected wavelet. Intuitively, wavelet polarity follows reflection coefficients that are negative when faster or denser layers overlie slower or less dense (for example, clay over dry sand) layers and positive when slower or less dense layers overlie faster or denser (for example, gravel over limestone) layers. A reflectivity of one means all energy will be reflected at the interface.

5.3  Equipment—Geophysical equipment used for surface seismic measurement can be divided into three general categories: source, seismic sensors, and seismograph. Sources generate seismic waves that propagate through the ground as either an impulsive or a coded wavetrain. Seismic sensors can measure changes in acceleration, velocity, displacement, or pressure. Seismographs measure, convert, and save the electric signal from the seismic sensors by conditioning the analog signal and then converting the analog signal to a digital format (A/D). These digital data are stored in a predetermined standardized format. A wide variety of seismic surveying equipment is available and the choice of equipment for a seismic reflection survey should be made to meet the objectives of the survey.

5.3.1 Sources—Seismic sources come in two basic types: impulsive and coded. Impulsive sources transfer all their energy (potential, kinetic, chemical, or some combination) to the earth instantaneously (that is, usually in less than a few milliseconds). Impulsive source types include explosives, weight drops, and projectiles. Coded sources deliver their energy over a given time interval in a predetermined fashion (swept frequency or impulse modulated as a function of time). Source energy characteristics are highly dependent on near-surface conditions and source type (6-9). Consistent, broad bandwidth source energy performance is important in seismic reflection surveying. The primary measure of source effectiveness is the measure of signal-to-noise ratio and resolution potential as estimated from the recorded signal.

5.3.1.1 Selection of the seismic source should be based upon the objectives of the survey, site surface

Loading...

Failed to load document history.

Publish Date Document Id Type View