Standard Test Method for John Deere Coolant Cavitation Test (Withdrawn 2025)
1.1 This test method is commonly referred to as the John Deere Cavitation Test.2 The test method defines a heavy-duty diesel engine to evaluate coolant protection as related to cylinder liner pitting caused by cavitation.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. The only exception is where there is no direct SI equivalent such as screw threads, national pipe threads/diameters, and tubing sizes.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See Annex A1 for general safety precautions.
1.4 Table of Contents:
Scope | 1 |
Referenced Documents | 2 |
Terminology | 3 |
Summary of Test Method | 4 |
Significance and Use | 5 |
Apparatus | 6 |
Test Engine Configuration | 6.1 |
Test Engine | 6.1.1 |
Test Stand Configuration | 6.2 |
Engine Mounting | 6.2.1 |
Intake Air System | 6.2.2 |
Aftercooler | 6.2.3 |
Exhaust System | 6.2.4 |
Fuel System | 6.2.5 |
Coolant System | 6.2.6 |
Oil System | 6.2.7 |
Oil Volume | 6.2.7.1 |
Pressurized Oil Fill System | 6.2.7.2 |
External Oil System | 6.2.7.3 |
Oil Sample Valve Location | 6.2.7.4 |
Unacceptable Oil System Materials | 6.2.7.5 |
Crankcase Aspiration | 6.3 |
Blowby Rate | 6.4 |
System Time Responses | 6.5 |
Clearance Measurements |
1.1 This test method is commonly referred to as the John Deere Cavitation Test. The test method defines a heavy-duty diesel engine to evaluate coolant protection as related to cylinder liner pitting caused by cavitation.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. The only exception is where there is no direct SI equivalent such as screw threads, national pipe threads/diameters, and tubing sizes.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See Annex A1 for general safety precautions.
1.4 Table of Contents:
5.1 This test method was developed to evaluate the ability of a heavy-duty diesel engine coolant to provide protection against damage resulting from a phenomenon known as cylinder liner cavitation corrosion.
5.2 This test method may be used for engine coolant specification acceptance when all details of this test method are in compliance.
5.3 The design of the engine used in this test method is a production OEM diesel engine modified to consistently produce the operating conditions that accelerate damage from cylinder liner cavitation. This factor, along with the accelerated operating conditions, needs to be considered when extrapolating test results.
Failed to load document history.
| Publish Date | Document Id | Type | View |
|---|