ASTM D800-05(2014)

Withdrawn Revision
Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions (Withdrawn 2023)

Best Price Guarantee Jan 1, 2014 English 12 Pages

Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
ASTM D800-05(2014) PDF Preview
ASTM D800-05(2014)

These test methods describe the procedures for the chemical analysis of industrial metal cleaning compositions in solid, paste, or liquid form.

These cleaning compositions may contain caustic alkalies, silicates, phosphates, chromates, carbonates, bicarbonates, borates, sulfates, sulfites, nitrates, chlorides, soaps, rosin, sulfonated wetting agents, anti-foaming agents, organic bases, organic solvents, organic coupling agents, and sometimes inorganic acid salts or organic acids.

Tests for the following shall be performed to conform with the specified requirements:

  • Percentage of total sodium oxide
  • Percentage of potassium oxide
  • Percentage of free sodium hydroxide
  • Percentage of water
  • Percentage of losses
  • Percentage of matter insoluble in alcohol
  • Percentage of fatty acids
  • Percentage of rosin
  • Percentage of synthetic detergent or wetting agent
  • Percentage of silica
  • Percentage of phosphorus pentoxide
  • Percentage of carbon dioxide
  • Percentage of sodium chloride
  • Percentage of sodium sulfate
  • Percentage of volatile hydrocarbons

1.1Β These test methods describe the procedures for the chemical analysis of industrial metal cleaning compositions in solid, paste, or liquid form. These cleaning compositions may contain caustic alkalies, silicates, phosphates, chromates, carbonates, bicarbonates, borates, sulfates, sulfites, nitrates, chlorides, soaps, rosin, sulfonated wetting agents, anti-foaming agents, organic bases, organic solvents, organic coupling agents, and sometimes inorganic acid salts or organic acids.

Occasionally, such cleaning compositions may contain sulfonated oils; in such cases, reference should be made to Method D500. The examination under a low power microscope or magnifying glass, supplemented by a few qualitative tests, will often indicate the number of components and their identity.

1.2Β The analytical methods appear in the following order:

  • Preparation of Sample – Section 4
  • Total Alkalinity as Na2O – Sections 5 – 8
  • Total Fatty Acids (and Rosin) – Sections 9 and 10
  • Na2O Combined with Fatty Acids (and Rosin) – Sections 11 and 12
  • Anhydrous Soap – Section 13
  • β€”Rosin (McNicoll Test Method):
    • Qualitative – Sections 14 and 15
    • Quantitative – Sections 16 – 19
  • Total Silica Calculated as SiO2 – Sections 20 – 23
  • Phosphates:
    • Qualitative – Sections 24 and 25
    • Quantitative – Sections 26 – 28
  • Combined Sodium and Potassium Oxides – Sections 34 – 37
  • Chlorides – Sections 38 – 40
  • Sulfates – Sections 41 – 43
  • Water, Distillation Test Method – Sections 44 – 47
  • Carbon Dioxide by Evolution-Absorption Test Method – Sections 48 – 52
  • Loss at 105Β°C – Sections 53 and 54
  • Total Matter Insoluble in Alcohol – Sections 55 – 57
  • Free Alkali – Sections 58 – 60
  • Synthetic Detergent or Wetting Agent – Sections 61 and 62
  • Volatile Hydrocarbons – Sections 63 – 67
  • Loss on Ignition – Sections 68 and 69
  • Report – Sections 70 and 71

1.3Β The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4Β This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Material Safety Data Sheets are available for reagents and materials. Review them for hazards prior to usage. See 6.1 for a specific hazards statement.

Loading...

Failed to load document history.

Publish Date Document Id Type View