ASTM D8640-26

Current Revision
Standard Test Method for Measurement of Metals in Gaseous Fuels using Sorbent Tubes

Best Price Guarantee Jul 1, 2026 English 8 Pages

Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
ASTM International Logo

ASTM D8640-26

Standard Test Method for Measurement of Metals in Gaseous Fuels using Sorbent Tubes

PUBLISH DATE 2026
PAGES 8
ASTM D8640-26

1.1 This test method covers the measurement of element-specific metal concentrations in biogas, compressed natural gas, renewable natural gas (RNG), and other gaseous fuel samples at low ppb(v) to ppm(v) concentrations. The test achieves this by collecting all vapor-phase and gas-entrained forms of metal-containing compounds onto a sorbent tube and subsequently analyzing the tubes by Inductively Coupled Plasma techniques, such as Inductively Coupled Plasma – Mass Spectrometry (ICP-MS).

1.2 This test method measures the total concentration of each target metal element, reported as the sum of all chemical species containing that element, regardless of oxidation state or molecular form. For the purposes of this standard, these analytes are referred to as the “metal” or “metal analyte.”

1.3 This test method does not speciate metal compounds and cannot be used to determine the concentration of individual metal species (for example, organometallics versus inorganic compounds). Suitability of a sorbent for a given metal analyte is demonstrated through the performance criteria specified in Section 7, including background, breakthrough, and repeatability requirements.

1.4 This test method does not address issues such as how to determine whether the sample collected on the sorbent tube is representative for the source being sampled with regard to particulate-phase material and potential deposition upstream of the tube. This limitation also exists for all existing methods where particulate matter is collected from a subsampled gas stream, including other methods that are currently used to measure metals in gaseous fuels.

1.5 Units— The values stated in SI units are to be regarded as standard. The values given in parentheses are provided for information only and are not considered standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

5.1 Several metals commonly found in various waste streams are known to become entrained in the gas phase under the anaerobic conditions of a landfill or digester through biologically mediated methylation, formation of metal hydrides, and other pathways.

Metal compounds may also be present in entrained particles. Several of these metal containing compounds are classified as priority pollutants by US EPA and are generally regarded as deleterious to human health.

Utility-defined gas quality specifications and tariffs for RNG interconnections often include maximum allowable concentrations of metals, requiring that RNG producers periodically measure and report the metal elements in their product gas.

The ability to perform accurate analysis of metals in RNG is also critical for producers, utilities, and manufacturers of gas upgrading equipment to assess the efficacy of gas treatment technology in removing metal containing compounds through the gas upgrading process.

Loading...

Failed to load document history.

Publish Date Document Id Type View