ASTM E101-91

Withdrawn Revision
Test Method for Spectrographic Analysis of Aluminum and Aluminum Alloys by the Point-To-Plane Technique (Withdrawn 1996)

Best Price Guarantee Jan 1, 1991 English 5 Pages

Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
ASTM E101-91 PDF Preview
ASTM E101-91

1.1 This test method covers the spectrographic analysis of aluminum and aluminum alloys for the following elements in the ranges indicated:

  • Silicon 0.02 to 14.0
  • Copper 0.001 to 10.0
  • Magnesium 0.001 to 10.0
  • Zinc 0.03 to 8.0
  • Nickel 0.03 to 3.0
  • Iron 0.02 to 2.0
  • Manganese 0.005 to 2.0
  • Lead 0.03 to 0.7
  • Bismuth 0.03 to 0.7
  • Chromium 0.01 to 0.5
  • Titanium 0.01 to 0.5
  • Tin 0.01 to 0.5
  • Beryllium 0.0002 to 0.5
  • Calcium 0.0005 to 0.1
  • Sodium 0.0005 to 0.05

1.2 This test method is applicable primarily to the analysis of chill-cast disks, but it may be extended, with proper precautions, to the analysis of samples in other forms on which a flat surface for sparking can be machined. Standards and samples should be of similar composition and metallurgical state; when they are not, corrections must be applied to compensate for these effects.

1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.1 This test method covers the spectrographic analysis of aluminum and aluminum alloys for the following elements in the ranges indicated:

  • Silicon 0.02 to 14.0%
  • Copper 0.001 to 10.0%
  • Magnesium 0.001 to 10.0%
  • Zinc 0.03 to 8.0%
  • Nickel 0.03 to 3.0%
  • Iron 0.02 to 2.0%
  • Manganese 0.005 to 2.0%
  • Lead 0.03 to 0.7%
  • Bismuth 0.03 to 0.7%
  • Chromium 0.01 to 0.5%
  • Titanium 0.01 to 0.5%
  • Tin 0.01 to 0.5%
  • Beryllium 0.0002 to 0.5%
  • Calcium 0.0005 to 0.1%
  • Sodium 0.0005 to 0.05%

1.2 This test method is applicable primarily to the analysis of chill-cast disks, but it may be extended, with proper precautions, to the analysis of samples in other forms on which a flat surface for sparking can be machined. Standards and samples should be of similar composition and metallurgical state; when they are not, corrections must be applied to compensate for these effects.

1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Loading...

Failed to load document history.

Publish Date Document Id Type View