ASTM E1587-25a

Current Revision
Standard Test Methods for Chemical Analysis of Refined Nickel

Best Price Guarantee Nov 15, 2025 English 13 Pages


Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
ASTM International Logo

ASTM E1587-25a

Standard Test Methods for Chemical Analysis of Refined Nickel

PUBLISH DATE 2025
PAGES 13
ASTM E1587-25a

1.1Β These test methods apply to the chemical analysis of refined nickel and other forms of metallic nickel having chemical compositions within the following limits:

Element and Mass Fraction, %

  • Antimony, less than 0.005
  • Arsenic, less than 0.005
  • Bismuth, less than 0.01
  • Cadmium, less than 0.0025
  • Carbon, max 0.03
  • Cobalt, max 1.00
  • Copper, max 1.00
  • Hydrogen, max 0.003
  • Iron, max 0.15
  • Lead, less than 0.01
  • Manganese, less than 0.20
  • Nickel, min 98.0
  • Nitrogen, less than 0.50
  • Oxygen, less than 0.03
  • Phosphorus, less than 0.005
  • Selenium, less than 0.0010
  • Silicon, less than 0.005
  • Silver, less than 0.01
  • Sulfur, max 0.01
  • Tellurium, less than 0.0010
  • Thallium, less than 0.0010
  • Tin, less than 0.005
  • Zinc, less than 0.015

1.2Β These test methods may be used to determine the following elements by the methods indicated:

  • Antimony, Arsenic, Bismuth, Cadmium, Lead, Selenium, Silver, Tellurium, Tin, and Thallium by the Graphite Furnace Atomic Absorption Spectrometric Method (Sections 21–31)
  • Bismuth, Cadmium, Cobalt, Copper, Iron, Lead, Manganese, Silver, and Zinc by the Flame Atomic Absorption Spectrometric Method (Sections 9–20)
  • Sulfur by the Methylene Blue Spectrophotometric Method After Generation of Hydrogen Sulfide (Sections 32–42)

1.3Β The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4Β This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautions, see Section 6.

1.5Β This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

4.1Β These test methods are primarily intended to test refined nickel metal for compliance with compositional specifications.

It is assumed that all who use these test methods will be trained analysts capable of performing common laboratory procedures skillfully and safely.

It is expected that the analytical work will be performed in a properly equipped laboratory under appropriate quality control practices.

Loading...

Failed to load document history.

Publish Date Document Id Type View