Loading...
Standard Guide for Conducting Whole Sediment Toxicity Tests with Amphibians
1.1Â This standard covers procedures for obtaining laboratory data concerning the toxicity of test material (for example, sediment or hydric soil (that is, a soil that is saturated, flooded, or ponded long enough during the growing season to develop anaerobic (oxygen-lacking) conditions that favor the growth and regeneration of hydrophytic vegetation)) to amphibians. This test procedure uses larvae of the northern leopard frog (Lithobates pipiens). Other anuran species (for example, the green frog (Lithobates clamitans), the wood frog (Lithobates sylvatica), the American toad (Bufo americanus)) may be used if sufficient data on handling, feeding, and sensitivity are available. Test material may be sediments or hydric soil collected from the field or spiked with compounds in the laboratory.
1.2Â The test procedure describes a 10-d whole sediment toxicity test with an assessment of mortality and selected sublethal endpoints (that is, body width, body length). The toxicity tests are conducted in 300 to 500-mL chambers containing 100 mL of sediment and 175 mL of overlying water. Overlying water is renewed daily and larval amphibians are fed during the toxicity test once they reach Gosner stage 25 (operculum closure over gills). The test procedure is designed to assess freshwater sediments, however, R. pipiens can tolerate mildly saline water (not exceeding about 2500 mg Cl-/L, equivalent to a salinity of about 4.1 when Na+ is the cation) in 10-d tests, although such tests should always include a concurrent freshwater control. Alternative test durations and sublethal endpoints may be considered based on site-specific needs. Statistical evaluations are conducted to determine whether test materials are significantly more toxic than the laboratory control sediment or a field-collected reference sample(s).
1.3Â Where appropriate, this standard has been designed to be consistent with previously developed methods for assessing sediment toxicity to invertebrates (for example, Hyalella azteca and Chironomus dilutus toxicity tests) described in the United States Environmental Protection Agency (USEPA, (1))2 freshwater sediment testing guidance, Test Methods E1367 and E1706, and Guides E1391, E1525, E1611, and E1688. Tests extending to 10 d or beyond, and including sublethal measurements such as growth, are considered more effective in identifying chronic toxicity and thus delineating areas of moderate contamination (1-3).
1.4Â Many historical amphibian studies, both water and sediment exposure, have used tests of shorter duration (5 days or less) (for example, 4-7) and, although both survival and sublethal endpoints were often assessed, there is substantive evidence that tests of longer duration are likely to be more sensitive to some contaminants (8-10). Research performed to develop and validate this test protocol included long-term (through metamorphosis) investigations and other researchers have also conducted long-duration tests with anurans (7-20). Interestingly, some studies with anurans have shown significantly reduced growth (for example, whole body mass, snout-vent length) can be detected earlier in a longer-term test (for example, at 14-20 d), but cannot be statistically distinguished in older organisms later in the test (11, 14). In the development of these procedures, an attempt was made to balance the needs of a practical assessment with the importance of assessing longer-term effects so that the results will demonstrate the needed accuracy and precision. The most recent sediment toxicity testing protocols for invertebrates have encompassed longer duration studies which allow the measurement of reproductive endpoints (1, 21). Such tests, because of increased sensitivity of the sublethal endpoints, may also be helpful in evaluating toxicity. Full life-cycle studies with anurans (including reproduction) are usually not feasible from either a technical or monetary standpoint. However, if site-specific information indicates that the contaminants present are likely to affect other endpoints (including teratogenicity), then the duration of the toxicity test may be increased through metamorphosis or additional sublethal endpoints may be measured (for example, impaired behavior, deformities, time-to-metamorphosis). The possible inclusion of these endpoints and extension of test length should be considered during development of the project or study plan (see 8.1.1).
1.5Â The methodology presented in this standard was developed under a Department of Defense (DoD) research program and presented in a guidance manual for risk assessment staff and state/federal regulators involved in the review and approval of risk assessment work plans and reports (22). To develop this method, a number of tests with spiked sediment tests were conducted (22, 23). Since development of the methodology it has been used operationally to evaluate field-collected sediments from several state and federal environmental sites (24, 25). For most of these studies the preferred test organisms, Lithobates pipiens, was used. At a lead-contaminated state-led site, operated by the Massachusetts Highway Department, Xenopus laevis(African clawed frog) was used in the sediment test system because of availability problems with Lithobates pipiens (26). The test method was also used to evaluate sediment toxicity at a cadmium-contaminated USEPA Region 4-led site in Tennessee (27). The methodology was used to help characterize potential effects of contaminants on amphibians and to help develop preliminary remedial goals, if warranted. All tests evaluated survival and growth effects after 10 d of exposure in accordance with the methods presented in this standard.
1.6Â The use of larval amphibians to assess environmental toxicity is not novel. Researchers have used tadpoles to examine toxicity of metals and organic compounds. Most of these studies have been through water exposure, usually in a manner similar to fish or invertebrate exposure as described in Guide E729 (28-<
1.1Â This standard covers procedures for obtaining laboratory data concerning the toxicity of test material (for example, sediment or hydric soil (that is, a soil that is saturated, flooded, or ponded long enough during the growing season to develop anaerobic (oxygen-lacking) conditions that favor the growth and regeneration of hydrophytic vegetation)) to amphibians. This test procedure uses larvae of the northern leopard frog (Lithobates pipiens). Other anuran species (for example, the green frog (Lithobates clamitans), the wood frog (Lithobates sylvatica), the American toad (Bufo americanus)) may be used if sufficient data on handling, feeding, and sensitivity are available. Test material may be sediments or hydric soil collected from the field or spiked with compounds in the laboratory.
1.2Â The test procedure describes a 10-d whole sediment toxicity test with an assessment of mortality and selected sublethal endpoints (that is, body width, body length). The toxicity tests are conducted in 300 to 500-mL chambers containing 100 mL of sediment and 175 mL of overlying water. Overlying water is renewed daily and larval amphibians are fed during the toxicity test once they reach Gosner stage 25 (operculum closure over gills). The test procedure is designed to assess freshwater sediments, however, R. pipiens can tolerate mildly saline water (not exceeding about 2500 mg Cl-/L, equivalent to a salinity of about 4.1 when Na+ is the cation) in 10-d tests, although such tests should always include a concurrent freshwater control. Alternative test durations and sublethal endpoints may be considered based on site-specific needs. Statistical evaluations are conducted to determine whether test materials are significantly more toxic than the laboratory control sediment or a field-collected reference sample(s).
1.3Â Where appropriate, this standard has been designed to be consistent with previously developed methods for assessing sediment toxicity to invertebrates (for example, Hyalella azteca and Chironomus dilutus toxicity tests) described in the United States Environmental Protection Agency (USEPA, (1))2 freshwater sediment testing guidance, Test Methods E1367 and E1706, and Guides E1391, E1525, E1611, and E1688. Tests extending to 10 d or beyond, and including sublethal measurements such as growth, are considered more effective in identifying chronic toxicity and thus delineating areas of moderate contamination (1-3).
1.4Â Many historical amphibian studies, both water and sediment exposure, have used tests of shorter duration (5 days or less) (for example, 4-7) and, although both survival and sublethal endpoints were often assessed, there is substantive evidence that tests of longer duration are likely to be more sensitive to some contaminants (8-10). Research performed to develop and validate this test protocol included long-term (through metamorphosis) investigations and other researchers have also conducted long-duration tests with anurans (7-20). Interestingly, some studies with anurans have shown significantly reduced growth (for example, whole body mass, snout-vent length) can be detected earlier in a longer-term test (for example, at 14-20 d), but cannot be statistically distinguished in older organisms later in the test (11, 14). In the development of these procedures, an attempt was made to balance the needs of a practical assessment with the importance of assessing longer-term effects so that the results will demonstrate the needed accuracy and precision. The most recent sediment toxicity testing protocols for invertebrates have encompassed longer duration studies which allow the measurement of reproductive endpoints (1, 21). Such tests, because of increased sensitivity of the sublethal endpoints, may also be helpful in evaluating toxicity. Full life-cycle studies with anurans (including reproduction) are usually not feasible from either a technical or monetary standpoint. However, if site-specific information indicates that the contaminants present are likely to affect other endpoints (including teratogenicity), then the duration of the toxicity test may be increased through metamorphosis or additional sublethal endpoints may be measured (for example, impaired behavior, deformities, time-to-metamorphosis). The possible inclusion of these endpoints and extension of test length should be considered during development of the project or study plan (see 8.1.1).
1.5Â The methodology presented in this standard was developed under a Department of Defense (DoD) research program and presented in a guidance manual for risk assessment staff and state/federal regulators involved in the review and approval of risk assessment work plans and reports (22). To develop this method, a number of tests with spiked sediment tests were conducted (22, 23). Since development of the methodology it has been used operationally to evaluate field-collected sediments from several state and federal environmental sites (24, 25). For most of these studies the preferred test organisms, Lithobates pipiens, was used. At a lead-contaminated state-led site, operated by the Massachusetts Highway Department, Xenopus laevis(African clawed frog) was used in the sediment test system because of availability problems with Lithobates pipiens (26), The test method was also used to evaluate sediment toxicity at a cadmium-contaminated USEPA Region 4-led site in Tennessee (27). The methodology was used to help characterize potential effects of contaminants on amphibians and to help develop preliminary remedial goals, if warranted. All tests evaluated survival and growth effects after 10 d of exposure in accordance with the methods presented in this standard.
1.6Â The use of larval amphibians to assess environmental toxicity is not novel. Researchers have used tadpoles to examine toxicity of metals and organic compounds. Most of these studies have been through water exposure, usually in a manner similar to fish or invertebrate exposure as described in Guide E729 (28-<
5.1 While federal criteria and state standards exist that define acute and chronic “safe” levels in the water column, effects levels in the sediment are poorly defined and may be dependent upon numerous modifying factors. Even where USEPA recommended Water Quality Criteria (WQC, (49)) are not exceeded by water-borne concentrations, organisms that live in or near the sediment may still be adversely affected (50).
Therefore, simply measuring the concentration of a chemical in the sediment or in the water is often insufficient to evaluate its actual environmental toxicity. Concentrations of contaminants in sediment may be much higher than concentrations in overlying water; this is especially true of hydrophobic organic compounds as well as inorganic ions that have a strong affinity for organic ligands and negatively-charged surfaces.
Higher chemical concentrations in sediment do not, however, always translate to greater toxicity or bioaccumulation (51), although research also suggests that amending sediment with organic matter actually increases the bioaccumulation of contaminant particles (52, 53).
Other factors that can potentially influence sediment bioaccumulation and toxicity include pH, mineralogical composition, acid-volatile sulfide (AVS), grain size, and temperature (54-56).
Laboratory toxicity tests provide a direct and effective way to evaluate the impacts of sediment contamination on environmental receptors while providing empirical consideration of all of the physical, chemical and biological parameters that may influence toxicity.
5.2Â Amphibians are often a major ecosystem component of wetlands around the world; however, limited data are available regarding the effects of sediment-bound contaminants to amphibians (39, 41, 43, 55, 57, 58).
Laboratory studies such as the procedure described in this standard are one means of directly assessing sediment toxicity to amphibians in order to evaluate potential ecological risks in wetlands.
5.3Â Results from sediment testing with this procedure may be useful in developing chemical-specific sediment screening values for amphibians.
5.4Â Sediment toxicity tests can be used to demonstrate the reaction of test organisms to the specific combination of physical and chemical characteristics in an environmental medium.
The bioavailability of chemicals is dependent on a number of factors, which are both site-specific and medium-specific. Although many of these factors can be estimated using equilibrium partitioning techniques, it is difficult to account for all the physical and chemical properties which could potentially affect bioavailability.
Sediment toxicity tests may be particularly applicable to evaluating hydrophobic compounds which may not readily partition into the water column.
See Table 1 for a summary of advantages and disadvantages associated with sediment toxicity tests.
| SDO | ASTM: ASTM International |
| Document Number | E2591 |
| Publication Date | Jan. 1, 2022 |
| Language | en - English |
| Page Count | 19 |
| Revision Level | 22 |
| Supercedes | |
| Committee | E50.47 |
Failed to load document history.
| Publish Date | Document Id | Type | View |
|---|