Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-silicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5, Si 1, Mg 0.8)

Aluminum-copper-magnesium alloy wires for solid, cold forged rivets (not exceeding 3/8 inch diameter)

Specification for hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (free from peripheral and asymmetric coarse grain) (not less than 14 mm nor more than 36 mm across flats) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)

Specification for aluminium-alloy-coated sheet and strip of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15)

Specification for ingots and castings of aluminium-copper alloy (165 MN/m² 0.2 per cent proof stress) (Cu 4.5)

Specification for ingots and castings of aluminium-copper alloy (200 MN/m² 0.2 per cent proof stress) (Cu 4.5)

Specification for plate of aluminium-copper-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)

Specification for plate of aluminium-zinc-magnesium-copper-chromium alloy (solution treated, controlled stretched and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15)

Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated, controlled stretched and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6)

Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature: not controlled stretched) (Cu 4.4, Mg 1.5, Mn 0.6)

Specification for ingots and castings of aluminium-silicon-magnesium alloy (solution treated and precipitation treated) (Si 7, Mg 0.3)

Methods of numbering propulsion units and components and describing their direction of rotation

Aircraft tyres and rims -- Specification for new tyres, retreads and rims

Specification for outside diameters and thicknesses of tubing

Specification for retreading of cross ply tyres for aircraft

Aircraft. Hydraulic components. Marking to indicate fluid for which component is approved

Specification for clearance dimensions for tripod jacks for aircraft

Classification for pressure and temperature for fluid systems and components

Method for impulse testing of hydraulic hose, tubing and fitting assemblies for aerospace fluid systems

Aircraft. Fluid systems. Thermal shock testing of piping and fittings

Specification for temperature control in the heat treatment of metals

Specification for interface of metric couplings, 24° cone, for aerospace fluid systems

Specification for dimensions of aerospace fluid system port connection, seal and fitting end

Specification for oro-nasal oxygen mask assemblies for use in demand systems

Specification for general requirements for construction and performance of airborne chemical oxygen generators