Procedure for inspection, testing and acceptance of iron, nickel, copper, cobalt and refractory metal base alloy castings

Specification for nickel-chromium-cobalt-molybdenum-aluminium-titanium alloy castings (Nickel base Cr 15.5, Co 10.0, Mo 8,3, Al 4.2, Ti 3.6)

Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)

Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy billets, bars and forgings (cobalt base Cr 20, W 15, Ni 10, Mn 1.5)

Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 50 mm)

Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel (precipitation hardening) billets, bars, forgings and parts (930-1080 MPa)

Specification for elastomeric grommets (polychloroprene) for aerospace use

Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 920-1180 MPa)

Specification for two component polyurethane finish for aerospace purposes

Specification for steel castings for general engineering purposes

Domestic pressure cookers with embedded electric elements (safety requirements)

Drills and reamers -- Twist drills

Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads) -- Diameters ¼ in and over

Specification for electrically bonded road and rail tanker hose and hose assemblies for petroleum products

Specification for dimensions of ISO metric precision hexagon bolts, screws and nuts. Metric units

Railway signalling symbols schematic symbols

Railway signalling symbols wiring symbols and written circuits

Specification for polytetrafluoroethylene (PTFE) sheet (metric and imperial units)

Specification for refrigerated room air-conditioners

Testing of Coating Powders - Particle Size Analysis by Laserdiffraction

Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy cold drawn wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)

Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy cold drawn and solution treated wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)

Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy wire for thread inserts (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) (0.45 mm to 2 mm diameter)

Specification for nickel-chromium-titanium heat-resisting alloy bar and wire for rivets and rivets (Maximum diameter or minor sectional dimension 20 mm) (Nickel base, Cr 19.5, Ti 0.4)

Specification for Chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1270 MPa to 1470 MPa)