Loading...
Methods of testing plastics. Thermal properties -- Cold crack temperature of film and thin sheeting
This method determines a characteristic temperature at which cracks are produced in film or thin sheeting, as a guide to its low-temperature performance.
The cold crack temperature should not be considered identical with the low-temperature limit for materials in actual service, since this is influenced by the conditions of service in each case.
The maximum thickness depends on the stiffness of the material and the ability of the hammer to flatten the loop of material at the test temperature, but is about 1 mm for flexible sheeting.
It is known that unsatisfactory results are sometimes obtained with thin polished plasticized PVC sheeting and PVC sheeting having a low plasticizer content.
| SDO | BSI: British Standards Institution |
| Document Number | 2782-1:Method 150D |
| Publication Date | Sept. 30, 1976 |
| Language | en - English |
| Page Count | |
| Revision Level | |
| Supercedes | |
| Committee | PRI/52 |
Failed to load document history.
| Publish Date | Document Id | Type | View |
|---|