Logo
Login Sign Up
Current Revision

BSI BS 3762-3.1:1990

Analysis of formulated detergents -- Quantitative test methods
Best Price Guarantee
Instant

$195.76

2-5 Days

$195.76

SAVE 10%

$352.37


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


View in Library
or
British Standards Institution Logo

BSI BS 3762-3.1:1990

Analysis of formulated detergents -- Quantitative test methods

PUBLISH DATE 1990
BSI BS 3762-3.1:1990

This International Standard specifies a manual or mechanical method for the determination of anionic-active matter present in detergents.

The method is applicable to solids or to aqueous solutions of the active material. The relative molecular mass of the anionic active matter has to be known.

The method is not applicable if cationic surface active agents are present.

The manual method is thus applicable to the determination of:

  • alkylbenzene sulfonates;
  • alkane sulfonates, sulfates and hydroxysulfates;
  • alkylphenol sulfates;
  • fatty alcohol methoxy- and ethoxysulfates;
  • dialkylsulfosuccinates;
  • and other active materials containing one hydrophilic group per molecule.

The mechanical method is applicable to all the above mentioned products provided it gives results comparable with those obtained using the manual method.

NOTE

  • Low relative molecular mass sulfonates present as hydrotropes (toluene, xylene) do not interfere when present in concentrations of up to 15 % (m/m) relative to the active matter. At higher levels, their influence should be evaluated in each particular case.
  • Soap, urea and salts of (ethylenedinitrilo)tetraacetic acid do not interfere.
  • In the presence of non-ionic surface agents, their influence should be evaluated in each particular case.
  • Typical inorganic components of detergent formulations, such as sodium chloride, sulfates, borates, tripolyphosphates, perborates, silicates, etc., do not interfere, but bleaching agents other than perborate should be destroyed before the analysis, and the sample should be completely soluble in water.

Direct two-phase titration method, manual or mechanical.

SDO BSI: British Standards Institution
Document Number 3762-3.1
Publication Date June 29, 1990
Language en - English
Page Count
Revision Level
Supercedes
Committee CII/34
Loading...

Failed to load document history.

Publish Date Document Id Type View