Logo
Login Sign Up
Current Revision

BSI BS EN 12341:2023

Ambient air. Standard gravimetric measurement method for the determination of the PM<sub>10</sub> or PM<sub>2,5</sub> mass concentration of suspended particulate matter
Best Price Guarantee
Instant
2-5 Days
SAVE 10%

$431.32

$431.32

$776.38

$623.13

$623.13

$1,121.63



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


View in Library
or
British Standards Institution Logo

BSI BS EN 12341:2023

Ambient air. Standard gravimetric measurement method for the determination of the PM<sub>10</sub> or PM<sub>2,5</sub> mass concentration of suspended particulate matter

PUBLISH DATE 2023
PAGES 64
BSI BS EN 12341:2023

This European Standard describes a standard method for determining the PM10 or PM2,5 mass concentrations of suspended particulate matter in ambient air by sampling the particulate matter on filters and weighing them by means of a balance.

Measurements are performed with samplers with inlet designs as specified in Annex A, operating at a nominal flow rate of 2,3 m3/h, over a nominal sampling period of 24 h. Measurement results are expressed in ÎĽg/m3, where the volume of air is the volume at ambient conditions near the inlet at the time of sampling.

The range of application of this European Standard is for 24 h measurements from approximately 1 ÎĽg/m3 (i.e. the limit of detection of the standard measurement method expressed as its uncertainty) up to 150 ÎĽg/m3 for PM10 and 120 ÎĽg/m3 for PM2,5.

This European Standard describes procedures and gives requirements for the testing and use of so-called sequential samplers, equipped with a filter changer, suitable for extended stand-alone operation. Sequential samplers are commonly used throughout the European Union for the measurement of concentrations in ambient air of PM10 or PM2,5. However, this European Standard does not exclude the use of single-filter samplers.

This European Standard represents an evolution of earlier European Standards (EN 12341:1998 and 2014, EN 14907:2005). New equipment procured shall comply fully with this European Standard. Older versions of these samplers, including those described in EN 12341:2014 Annex B, have a special status in terms of their use. These samplers can still be used for monitoring purposes and for ongoing quality control, provided that a well justified additional allowance is made to their uncertainties.

This European Standard also provides guidance for the selection and testing of filters with the aim of reducing the measurement uncertainty of the results obtained when applying this European Standard.

SDO BSI: British Standards Institution
Document Number EN 12341
Publication Date Aug. 10, 2023
Language en - English
Page Count 64
Revision Level
Supercedes
Committee EH/2/3
Loading...

Failed to load document history.

Publish Date Document Id Type View