BSI BS EN 60252-1:2011+A1:2013

Current Consolidated
AC motor capacitors -- General. Performance, testing and rating. Safety requirements. Guidance for installation and operation

Best Price Guarantee Nov 30, 2013 English 38 Pages

Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
British Standards Institution Logo

BSI BS EN 60252-1:2011+A1:2013

AC motor capacitors -- General. Performance, testing and rating. Safety requirements. Guidance for installation and operation

PUBLISH DATE 2013
PAGES 38
BSI BS EN 60252-1:2011+A1:2013

This part of IEC 60252 applies to motor capacitors intended for connection to windings of asynchronous motors supplied from a single-phase system having a frequency up to and including 100 Hz, and to capacitors to be connected to three-phase asynchronous motors so that these motors may be supplied from a single-phase system.

This standard covers impregnated or unimpregnated capacitors having a dielectric of paper, plastic film, or a combination of both, either metallized or with metal-foil electrodes, with rated voltages up to and including 660 V.

Motor start capacitors are covered by IEC 60252-2.

NOTE The following are excluded from this standard:

  • shunt capacitors of the self-healing type for a.c. power systems of up to and including 1 000 V nominal voltage (see IEC 60831-1);

  • shunt capacitors of non-self-healing type for a.c. power systems of up to and including 1 000 V nominal voltage (see IEC 60931-1);

  • shunt capacitors for a.c. power systems having a nominal voltage above 1 000 V (see IEC 60871-1);

  • capacitors for induction heat-generating plants, operating at frequencies between 40 Hz and 24 000 Hz (see IEC 60110-1);

  • series capacitors (see IEC 60143);

  • coupling capacitors and capacitor dividers (see IEC 60358);

  • capacitors to be used in power electronic circuits (see IEC 61071);

  • small a.c. capacitors to be used for fluorescent and discharge lamps (see IEC 61048);

  • capacitors for suppression of radio interference (IEC publication under consideration);

  • capacitors intended to be used in various types of electrical equipment and thus considered as components;

  • capacitors intended for use with d.c. voltage superimposed on a.c. voltage.

The object of this standard is

  1. to formulate uniform rules regarding performance, testing and rating;

  2. to formulate specific safety rules;

  3. to provide a guidance for installation and operation.

Loading...

Failed to load document history.

Publish Date Document Id Type View