IEC 61472-2 Ed. 1.0 b:2021

Current Revision

Live working - Minimum approach distances - Part 2: Method of determination of the electrical component distance for AC systems from 1,0 kV to 72,5 kV

Best Price Guarantee Mar 1, 2021 EN/FR 36 Pages

PDF Available after processing $100.87 Print Copy Ships in 2-5 Days Quantity: 1 $100.87 Bundle Save 10% Ships in 2-5 Days $181.57

Sub Total (1 Item(s)) $ 0.00

Estimated Shipping $ 0.00

Total (Pre-Tax) $ 0.00

IEC 61472-2 Ed. 1.0 b:2021

Name: IEC 61472-2 Ed. 1.0 b:2021 – Live working - Minimum approach distances - Part 2: Method of determination of the electrical component distance for AC systems from 1,0 kV to 72,5 kV
Brand: International Electrotechnical Commission
SKU: IEC 61472-2 Ed. 1.0 b:2021
Price: 100.87 USD
Availability: InStock

Live working - Minimum approach distances - Part 2: Method of determination of the electrical component distance for AC systems from 1,0 kV to 72,5 kV

PUBLISH DATE 2021

PAGES 36

Live working - Minimum approach distances - Part 2: Method of determination of the electrical component distance for AC systems from 1,0 kV to 72,5 kV

IEC 61472-2:2021 specifies a method for determining the electrical component of the minimum approach distances for live working, for AC systems 1 kV up to and including 72.5 kV.

This document addresses system overvoltages and the working air distances between equipment and/or workers at different potentials.

The withstand voltage and minimum approach distances determined by the method described in this document can be used only if the following working conditions prevail:

workers are trained for, and skilled in, working live lines or close to live conductors or equipment;
the operating conditions are adjusted so that the statistical overvoltage does not exceed the value selected for the determination of the required withstand voltage;
transient overvoltages are the determining overvoltages;
tool insulation has no continuous film of moisture present on the surface;
no lightning is observed within 10 km of the work site;
allowance is made for the effect of the conducting components of tools.