IEC 61753-131-03 Ed. 1.0 b:2021

Current Revision
Fibre optic interconnecting devices and passive components - Performance standard - Part 131-03: Single-mode mechanical fibre splice for category OP – Outdoor protected environment

Best Price Guarantee Oct 1, 2021 EN/FR 38 Pages

Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00
View in Library
or
International Electrotechnical Commission Logo

Fibre optic interconnecting devices and passive components - Performance standard - Part 131-03: Single-mode mechanical fibre splice for category OP – Outdoor protected environment

PUBLISH DATE 2021
PAGES 38

Fibre optic interconnecting devices and passive components - Performance standard - Part 131-03: Single-mode mechanical fibre splice for category OP – Outdoor protected environment.

IEC 61753-131-03:2021 contains the minimum tests, test severities and measurement requirements which a mechanical fibre splice need to satisfy in order to be categorised as meeting the requirements of single-mode fibre splice for use in category OP (Outdoor protected) environments, as defined in IEC 61753-1.

This document for mechanical splices defines the requirements for standard optical performance under a set of specified conditions. The standard contains a series or a set of tests and measurements with clearly stated conditions, severities and pass/fail criteria.

The series of tests, commonly referred to as an operating service environment or performance category, is intended to be a basis to prove the product’s ability to satisfy the requirements of a specific application, market sector or user group.

This first edition cancels and replaces IEC 61753-131-3 first edition published in 2010. This edition constitutes a technical revision.

This edition includes the following significant technical changes with respect to the previous edition:

  • a) addition of definitions;
  • b) addition of IEC 60068-2-10 mould growth test and test severities for materials;
  • c) replacement of the IEC 61753 1:2007 category U tests and test severities by the IEC 61753 1:2018 category OP tests;
  • d) addition of the requirement that dimensions are in accordance with IEC 61756-1;
  • e) addition of the bending moment test;
  • f) change of low temperature in cold test and change of temperature test to 25°C. If 40°C is required, the user can refer to category OP+.
Loading...

Failed to load document history.

Publish Date Document Id Type View