Current Revision

IEEE 1613-2023

IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Electric Power Substations

Online PDF

$78.00

$97.00

Bundle

$157.50

Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00

I have read and agree to the Terms & Conditions

IEEE 1613-2023

IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Electric Power Substations

PUBLISH DATE 2024

PAGES 48

IEEE 1613-2023

Document Information

Revision Standard - Active. Service conditions, electrical ratings, thermal ratings, electromagnetic compatibility (EMC), and environmental testing requirements are defined in this standard based upon IEEE standards and five International Electrotechnical Commission (IEC) EMC standards (for which there are no equivalent IEEE standards), to represent the harsh environment of electric power apparatus installations. This develops a common and reproducible basis for designing and testing devices with communications functions installed in this harsh environment. Where the device does not perform protection or control functions, testing of the communications functions is covered by IEEE Std 1613. Where the device performs protection or control functions and has communications ports, tests for all communications functions are covered by the IEEE C37.90 family of standards.

This standard specifies ratings and service conditions, environmental performance, and testing requirements for devices with communications functions used with electric power apparatus. Environmental and electromagnetic compatibility (EMC) immunity levels and type-tests simulating environments associated with electric apparatus are described. Acceptance criteria for evaluating device functionality are provided. For devices used with electric power apparatus and with communications ports (optical fiber port, copper wired port [e.g., Ethernet, power over Ethernet, serial, carrier current communications interface], antenna port, etc.), where the device does not perform protection or control functions, testing of the communications functions is covered by IEEE Std 1613. Where the device performs protection or control functions and has communications ports, tests for all communications functions are covered by the IEEE C37.90 family of standards.

The purpose of this standard is to define the environmental and EMC conditions required to establish a common and reproducible basis for designing and evaluating devices with communications functions used with electric power apparatus7. This standard applies only to finished equipment or fully-assembled equipment in its intended use.


SDO	IEEE: Institute of Electrical and Electronics Engineers
Document Number	1613
Publication Date	Feb. 26, 2024
Language	en - English
Page Count	48
Revision Level
Supercedes
Committee	Power System Relaying and Control

Publish Date	Document Id	Type
Feb. 26, 2024	1613-2023	Revision
Aug. 27, 2009	1613-2009	Revision
Aug. 12, 2003	1613-2003	Revision

SDO	Document	Title
IEEE	IEEE 1613.1	IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Transmission and Distribution Facilities
IEEE	IEEE 1646	IEEE Standard Communication Delivery Time Performance Requirements for Electric Power Substation Automation
IEEE	ANSI/IEEE 336	IEEE Standard Installation, Inspection, and Testing Requirements for Class 1E Power, Instrumentation and Electric Equipment at Nuclear Power Generating Stations
IEEE	IEEE 1815	IEEE Standard for Electric Power Systems Communications-Distributed Network Protocol (DNP3)
IEEE	IEEE 1615	IEEE Recommended Practice for Network Communication in Electric Power Substations
IEEE	IEEE 1775	IEEE Standard for Power Line Communication Equipment--Electromagnetic Compatibility (EMC) Requirements--Testing and Measurement Methods
IEEE	IEEE C37.2	IEEE Standard for Electrical Power System Device Function Numbers, Acronyms, and Contact Designations
IEEE	IEEE 11073-10700	IEEE Standard -- Health Informatics--Device Interoperability Part 10700: Point‐of‐Care Medical Device Communication--Standard for Base Requirements for Participants in a Service‐Oriented Device Connectivity (SDC) System
IEEE	IEEE 2030.3	IEEE Standard Test Procedures for Electric Energy Storage Equipment and Systems for Electric Power Systems Applications
IEEE	IEEE 262B	IEEE Trial Use Standard Dielectric Test Requirements for Power Transformers for Operation on Effectively Grounded Systems 345 kV and Above
IEEE	IEEE C57.19.00	IEEE Standard for General Requirements and Test Procedure for Power Apparatus Bushings
IEEE	IEEE 32	IEEE Standard Requirements, Terminology, and Test Procedures for Neutral Grounding Devices
IEEE	IEEE 515.1	IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Commercial Applications
IEEE	IEEE 515	IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications
AHRI	AHRI GAMA TESTING STANDARD	Indirect-Fired Water Heater Testing Standard
IEEE	IEEE C57.32	IEEE Standard for Requirements, Terminology, and Test Procedures for Neutral Grounding Devices
IEEE	IEEE 1505.3	IEEE Standard for the Universal Test Interface Framework and Pin Configuration for Portable/Benchtop Test Requirements Utilizing IEEE 1505(TM) Receiver Fixture Interface Standard
IEEE	IEEE 1802.3	IEEE Conformance Test Methodology for IEEE Standards for Local and Metropolitan Area Networks - Specific Requirements - Part 3: Carrier Sense Multiple Access With Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications
IEEE	IEEE C37.100.2	IEEE Standard for Common Requirements for Testing of AC Capacitive Current Switching Devices over 1000 V
IEEE	IEEE 487.5	IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Isolation Transformers
IEEE	IEEE 487.2	IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations through the Use of Optical Fiber Systems
IEEE	IEEE 487	IEEE Standard for the Electrical Protection of Communications Facilities Serving Electric Supply Locations -- General Considerations
IEEE	IEEE 487.1	IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of On-Grid Isolation Equipment
IEEE	IEEE 487.4	IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Neutralizing Transformers
IEEE	IEEE 487.3	IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Hybrid Facilities

IEEE 1613-2023

IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Electric Power Substations

IEEE 1613-2023

Document Information

Terms of Service

Conditions of Use

Privacy Policy

Copyright

Communications

Privacy Policy

Cookie Notice