Current Revision

IEEE 475-2000

IEEE Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz

Online PDF

$137.00

Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00

I have read and agree to the Terms & Conditions

IEEE 475-2000

IEEE Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz

PUBLISH DATE 2012

PAGES 24

IEEE 475-2000

Document Information

Revision Standard - Inactive-Reserved. Test procedures for microwave field disturbance sensors to measure radio frequency(RF) radiated field strength of the fundamental frequency, harmonic frequencies, near field power-flux density, and non-harmonic spurious emissions of sensors operating within the frequency range of 300 MHz to 40 GHz are defined.

This standard sets forth a test procedure for measurement of radio frequency (RF) emissions from intrusion-alarm field disturbance sensors in the frequency range 300 MHz to 40 GHz.

This project is being proposed in order to update the existing standard to the current state of the art.


SDO	IEEE: Institute of Electrical and Electronics Engineers
Document Number	475
Publication Date	June 8, 2012
Language	en - English
Page Count	24
Revision Level
Supercedes
Committee	Standards Development Committee

Publish Date	Document Id	Type	View
June 8, 2012	475-2000	Revision
June 14, 1994	475-1983	Revision

SDO	Document	Title
IEEE	IEEE 300	USA Standard and IEEE Test Procedure for Semiconductor Radiation Detectors (For Ionizing Radiation)
IEEE	ANSI/IEEE 300	IEEE Standard Test Procedures for Semiconductor Charged-Particle Detectors
IEEE	IEEE 213	IEEE Standard Procedure for Measuring Conducted Emissions in the Range of 300 kHz to 25 MHz from Television and FM Broadcast Receivers to Power Lines
IEEE	IEEE 1140	IEEE Standard Procedures for the Measurement of Electric and Magnetic Fields from Video Display Terminals (VDTs) from 5 Hz to 400 kHz
IEEE	IEEE 644	IEEE Standard Procedures for Measurement of Power Frequency Electric and Magnetic Fields from AC Power Lines
ISO	ISO/TR 10305-2	Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz
IEEE	IEEE 302	IEEE Standard Methods for Measuring Electromagnetic Field Strength for Frequencies Below 1000 MHz in Radio Wave Propagation
IEEE	IEEE 1309	IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz
IEEE	IEEE 291	IEEE Standard Methods for Measuring Electromagnetic Field Strength of Sinusoidal Continuous Waves, 30 Hz to 30 GHz
IEEE	ANSI/IEEE 430	IEEE Standard Procedures for the Measurement of Radio Noise from Overhead Power Lines
IEEE	ANSI/IEEE 455	IEEE Standard Test Procedure for Measuring Longitudinal Balance of Telephone Equipment Operating in the Voice Band
IEEE	IEEE 430	IEEE Trial Use Standard Procedures for the Measurement of Radio Noise from Overhead Power Lines
IEEE	IEEE 106	IEEE Standard Test procedure for Test Procedure for Toroidal Magnetic Amplifier Cores (Including Core Material Data)
ASHRAE	ASHRAE Standard 40	Methods of Testing for Rating Heat-Operated Unitary Air-Conditioning and Heat-Pump Equipment (ANSI Approved)
IEEE	IEEE 1901.1.1	IEEE Standard Test Procedures for IEEE Std 1901.1(TM) for Medium Frequency (less than 15 MHz) Power Line Communications for Smart Grid Applications
IEEE	IEEE 1027	IEEE Standard Method for Measurement of the Magnetic Field in the Vicinity of a Telephone Receiver
BSI	BSI BS EN IEC/IEEE 63195-1	Assessment of power density of human exposure to radio frequency fields from wireless devices in close proximity to the head and body (frequency range of 6 GHz to 300 GHz) -- Measurement procedure
IEEE	IEEE/IEC 63195-1	IEEE/IEC International Standard Assessment of power density of human exposure to radio frequency fields from wireless devices in close proximity to the head and body (frequency range of 6 GHz to 300 GHz)--Part 1: Measurement procedure
IEC	IEC/IEEE 63195-1	Assessment of power density of human exposure to radio frequency fields from wireless devices in close proximity to the head and body (frequency range of 6 GHz to 300 GHz) - Part 1: Measurement procedure
IEEE	IEEE 139	IEEE Recommended Practice for Measurement of Field Intensity Above 300 MC from Radio Frequency Industrial, Scientific, and Medical Equipment
IEEE	IEEE 1076/INT	IEEE Standards Interpretations: IEEE Std 1076-1987, IEEE Standard VHDL Language Reference Manual
IEEE	IEEE 187	IEEE Standard for Measurement of Emissions from FM and Television Broadcast Receivers in the Frequency Range of 9 kHz to 40 GHz
IEEE	IEEE 2067	IEEE Standard for Fiber Optic Sensors--Fiber Bragg Grating Interrogator Standard--Terminology and Definitions
IEEE	IEEE 398	IEEE Standard Test Procedures for Photomultipliers for Scintillation Counting and Glossary for Scintillation Counting Field
IEEE	IEEE C63.4	IEEE Standard for Methods of Measurement of Radio-Noise Emission from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz

IEEE 475-2000

IEEE Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz

IEEE 475-2000

Document Information

Terms of Service

Conditions of Use

Privacy Policy

Copyright

Communications

Privacy Policy

Cookie Notice