+1 888 608-7511
Need help finding a standard?
Help Desk
Paper, board and printing inks Printability Laboratory test method for offset ink setting
This document describes a laboratory test method, using an 1IGT-type or a 2prüfbau-type printability tester, for the preparation of specimens to evaluate the absorption rate of an ink on a substrate in offset lithography by setting-off the printed surface to an unprinted surface.
This method describes testing with an amount of ink simulating either single colour or multi-colour printing. The print and the set-off print (counter print) are made with interval times, between print and set-off, common for the target process.
This method evaluates a particular ink and substrate combination.
1These materials are available from IGT Testing Systems, www.igt.nl. This information is given for the convenience of the users of this document and does not constitute an endorsement by ISO of the products. Equivalent products may be used if they can be shown to lead to the same results.
2These materials are available from prüfbau, Dr.-Ing. H. Dürner GmbH, www.pruefbau.de. This information is given for the convenience of the users of this document and does not constitute an endorsement by ISO of the products. Equivalent products may be used if they can be shown to lead to the same results.
Failed to load document history.
| Publish Date | Document Id | Type | View |
|---|