Steel, Maraging, Bars, Forgings, Mechanical Tubing, Rings, and Forging Stock 18Ni - 7.8Co - 4.9Mo - 0.40Ti - 0.10Al Consumable Electrode Vacuum Melted, Annealed

Steel, Maraging, Bars, Forgings, Mechanical Tubing, Rings and Forging Stock 18.5Ni - 9.0Co - 4.9Mo - 0.65Ti - 0.10Al Consumable Electrode Vacuum Melted, Annealed

Steel, Maraging, Bars, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Rings, 18.5Ni - 12.0Co - 4.9Mo - 1.40Ti - 0.10Al, Premium Aircraft Quality, Double Vacuum Melted, Annealed (Maraging 350)

Steel, Bars, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Rings 1.0Cr - 7.5Ni - 4.5Co - 1.0Mo - 0.09V (0.29 - 0.34C) Consumable Electrode Vacuum Remelted, Annealed

Steel, Bars 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Special Aircraft Quality Cleanliness Normalized

Titanium Alloy Bars, Forgings, and Forging Stock, 5Al - 2.5Sn, Extra Low Interstitial, Annealed

Titanium Alloy Bars, Forgings and Forging Stock, 6.0Al - 4.0V, Solution Heat Treated and Aged

Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 4.0V Annealed

Titanium Alloy Bars and Forging Stock, 6.0Al - 4.0V Extra Low Interstitial, Annealed

Titanium Alloy Bars, Forgings, and Forging Stock, 6Al - 6V - 2Sn, Annealed

Nickel Alloy, Corrosion and Heat-Resistant, Powder for Additive Manufacturing, 62Ni - 21.5Cr - 9.0Mo - 3.65Nb

Process Requirements for Production of Metal Powder Feedstock for Use in Additive Manufacturing of Aerospace Parts

Titanium Alloy Preforms from Plasma Arc Directed Energy Deposition Additive Manufacturing on Substrate, Ti-6Al-4V, Stress Relieved

Wire Fed Plasma Arc Directed Energy Deposition Additive Manufacturing Process

Nickel Alloy, Corrosion and Heat-Resistant, Powder for Additive Manufacturing, 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe

Rivets, Aluminum Alloy, 4.5cu 1.5mg 0.6mn

Rivets, Steel-Corrosion Resistant 18cr 9ni Solution Heat Treated

Alloy Rivets, Corrosion and Heat Resistant, 74ni 15.5cr 8.0fe

Rivets, Alloy Corrosion and Heat Resistant, 47.5ni 22cr 1.5co 9.0mo 0.60w 18.5fe, Solution Heat Treated

Perfluorocarbon (FFKM) Engine Oil, Fuel and Hydraulic Fluid Resistant 70 to 80 Hardness For High Temperature Seals in Engine Oil Systems, Fuel Systems and Hydraulic Systems

Rubber: Fluorocarbon (FKM) High Temperature/Fluid Resistant Low Compression Set/ 85 to 95 Hardness For Seals In Fuel Systems and Specific Engine Oil Systems

Rubber: Vinyl-Methyl Silicone (VMQ) Hot Air Resistant Low Compression Set, 70 to 80 Type A Hardness for Seals in Hot Air Systems

Rubber: Acrylonitrile-Butadiene Rubber (NBR) Fuel and Low Temperature Resistant 60 - 70 Type “A” Hardness For Seals in Fuel Systems

Rubber: Fluorocarbon (FKM) High Temperature - Fluid Resistant Low Compression Set/70 to 80 Type A Hardness For Seals in Fuel Systems and Specific Engine Oil Systems

Fluorocarbon Elastomer (FKM) High Temperature/HTS Oil Resistant/Fuel Resistant Low Compression Set/70 to 80 Hardness, Low Temperature Tg -22 °F (-30 °C), for Seals in Oil/Fuel/Specific Hydraulic Systems