Logo
Login Sign Up
Current Revision

SAE J1442 (JUN2026)

High-Strength, Hot-Rolled Steel Bars

This item is not currently available for sale

SAE International Logo

SAE J1442 (JUN2026)

High-Strength, Hot-Rolled Steel Bars

PUBLISH DATE 2026
SAE J1442 (JUN2026)

This SAE Recommended Practice covers two levels of high strength structural low-alloy steel bars having minimum Yield Points of 345 MPa (50 ksi) and 450 MPa (65 ksi).

The two strength levels are 345 and 450 MPa or 50 and 65 ksi minimum yield point. Different chemical compositions are used to achieve the specified mechanical properties. In some cases there are significant differences in chemical composition for the same strength level, depending on the fabricating requirements.

It should be noted that although the mechanical properties for a steel grade sourced from different suppliers may be the same, the chemical composition may vary significantly. The fabricator should be aware that certain compositional differences may affect the forming, welding, and/or service requirements of the material. It is therefore recommended that the fabricator consult with the producer to understand the effect of chemical composition.

The products within the scope of this document include bars of the following types and sizes:

  • Rounds, squares, and hexagons of all sizes (cut length only)
  • Flats 5.2 mm (0.203 in) and greater in thickness but not greater than 150 mm (6 in) wide
  • Flats greater than 5.8 mm (0.229 in) thick and over 150 mm (6 in) to 204 mm (8 in) wide

This document previously covered plates, structural shapes, and bar size shapes of Grades 290A, 345A, 415A, 450A, 345W, 345F, 415F, 485F, and 550F as well as bars of Grades 290A, 415A, and 345W. These products are no longer covered; requirements for these products and grades can be found in ASTM Specifications as follows in Table 1:

Product Previous SAE Grade ASTM Specification/Grade
Plates, Structural Shapes, Bar Size Shapes, Bars 290A A 572/A 572M, Grade 42
Plates, Structural Shapes, Bar Size Shapes 345A A 572/A 572M, Grade 50
Plates, Structural Shapes, Bar Size Shapes, Bars 415A A 572/A 572M, Grade 60
Plates, Structural Shapes, Bar Size Shapes 450A A 57/A 572M, Grade 65
Plates, Structural Shapes, Bar Size Shapes, Bars 345W A 588/A 588M
Plates 345F A 656/A 656M, Grade 50
Plates 415F A 656/A 656M, Grade 60
Plates 485F A 656/A 656M, Grade 70
Plates 550F A 656/A 656M, Grade 80

TABLE 1

EQUIVALENT ASTM SPECIFICATIONS

SDO SAE: SAE International
Document Number J1442
Publication Date June 23, 2026
Language en - English
Page Count 6
Revision Level 202606
Supercedes
Committee
Loading...

Failed to load document history.

Publish Date Document Id Type View