Logo
Login Sign Up
Historical Revision

BSI DD CLC/TS 61496-3:2003

Safety of machinery. Electro-sensitive protective equipment -- Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR)
Best Price Guarantee
Instant

$443.91

2-5 Days

$443.91

SAVE 10%

$799.04


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


or
British Standards Institution Logo

BSI DD CLC/TS 61496-3:2003

Safety of machinery. Electro-sensitive protective equipment -- Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR)

PUBLISH DATE 2004
PAGES 60
BSI DD CLC/TS 61496-3:2003
IEC 61000-4-21:2011 considers tests of immunity and intentional or unintentional emissions for electric and/or electronic equipment and tests of screening effectiveness in reverberation chambers. It establishes the required test procedures for performing such tests. Only radiated phenomena are considered. The objective of IEC 61000-4-21:2011 is to establish a common reference for using reverberation chambers to evaluate the performance of electric and electronic equipment when subjected to radio-frequency electromagnetic fields and for determining the levels of radio-frequency radiation emitted from electric and electronic equipment. IEC 61000-4-21:2011 does not intend to specify the tests to be applied to a particular apparatus or system. Its main aim is to give a general basic reference to all concerned product committees of the IEC. The product committees should select emission limits and test methods in consultation with CISPR. The product committees remain responsible for the appropriate choice of the immunity tests and the immunity test limits to be applied to their equipment. Other methods, such as those covered in IEC 61000-4-3, CISPR 16-2-3 and CISPR 16-2-4 may be used. This second edition cancels and replaces the first edition published in 2003. This edition constitutes a technical revision and includes the following significant technical changes with respectto the first edition:
- In Clause 8, the use and specifications of E-field probes for application to reverberation chambers has been added.
- In Annex A, additional guidance and clarifications on the use of reverberation chambers at relatively low frequencies of operation (i.e., close to the lowest usable frequency of a given chamber) are given, and its implications on the estimation of field uncertainty are outlined.
- In Annex B, symmetric location of the field probes when the chamber exhibits cylindrical symmetry has been disallowed, as such placement could otherwise yield a false indication of field uniformity and chamber performance at different locations.
- Annex C now contains more quantitative guidance on the setting of the maximum permissible stirring speeds that warrant quasi-static conditions of operation for chamber validation and testing.
- In Annex D, a requirement for the EUT and equipment not to occupy more than 8 % of the total chamber volume in immunity testing has been added.
- Annex E has been extended with further guidance on the value of EUT directivity to be used in the estimation of radiated power and field.
- In Annex I, some clarifications on antenna efficiency measurements have been added.
- A new Annex K has been added that covers measurement uncertainty in reverberation chambers.
SDO BSI: British Standards Institution
Document Number CLC/TS 61496-3
Publication Date Feb. 5, 2004
Language en - English
Page Count 60
Revision Level
Supercedes
Committee MCE/3
Publish Date Document Id Type View
Sept. 30, 2008 DD CLC/TS 61496-3:2008 Revision
Feb. 5, 2004 DD CLC/TS 61496-3:2003 Revision