IEC 61753-111-08 Ed. 1.0 en:2021

Current Revision
Fibre optic interconnecting devices and passive components - Performance standard - Part 111-08: Sealed closures for category G - Ground

Best Price Guarantee Apr 1, 2021 34 Pages

Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00
View in Library
or
International Electrotechnical Commission Logo

Fibre optic interconnecting devices and passive components - Performance standard - Part 111-08: Sealed closures for category G - Ground

PUBLISH DATE 2021
PAGES 34

Fibre optic interconnecting devices and passive components - Performance standard - Part 111-08: Sealed closures for category G - Ground

IEC 61752-111-08:2021 contains the minimum tests, test severities and measurement requirements which a sealed fibre optic closure need to meet in order to be categorised as meeting the IEC standard for category G - Ground, as defined in Table A.14 of IEC 61753-1:2018. Free breathing closures are not covered in this document.

This first edition cancels and replaces IEC 61753-111-8 published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61753-111-8:

  • a) terms and definitions updated according to IEC 61753-1:2018 and IEC 61756-1:2019;
  • b) test severities updated according to IEC 61753-1:2018;
  • c) sealing tests are done with 20 kPa overpressure;
  • d) pass-fail criterion of pressure loss during test added to mechanical sealing tests;
  • e) vibration sealing test changed to 10 Hz, 3 mm amplitude and 1 000 000 cycles;
  • f) reduced loads added in cable retention test for small diameter cables and tubes;
  • g) reduced loads for cable axial compression test for small diameter cables;
  • h) the duration of the cycles in torsion and bending test is added;
  • i) free fall test removed (is covered by the optical shock test);
  • j) crush resistance test of 1 000 N for 10 min is added;
  • k) assembly and disassembly test: duration reduced to 5 cycles;
  • l) resistance to solvents and contaminating fluids: added immersion in diesel with duration of 1 h and 24 h drying time and added immersion in petroleum jelly for 5 days;
  • m) resistance to stress cracking solvents added for 5 days;
  • n) duration of the change of temperature reduced to 12 cycles;
  • o) water immersion test at 1 m for 7 days added.
Loading...

Failed to load document history.

Publish Date Document Id Type View